| Model | ESCAM QF280 | |
| General | Main processor | HI3518E |
| Operation System | Android, IOS | |
| Image Senor | 1/2″ progressive Sensor | |
| Compression | H.264+/H.265 | |
| Resolution | 1920*1080 1080P | |
| Internet Connection | WIFI | WIFI |
| Alarm | Detection Mode | PIR + Radar dual detection |
| Detection Distance | 0~12M | |
| Detect Angle | 120° | |
| Alarm | PIR sensor + radar both detection, Message push to APP | |
| PTZ | PTZ Angle | Horizontal 360 ° Vertical 120° |
| Speed | Horizontal 55 °/S Vertical 40°/S | |
| Night Vision | Full color night vision | 0.00001 Lux |
| IR LED | infrared LED 30M IR distance | |
| White light LED | white light LED 30M distance | |
| Audio | Built-in speaker | 3W |
| Built-in microphone | voice monitoring distance 20M | |
| Lens | Lens | 3.6mm |
| Lens Angle | 120° | |
| Storage | Cloud Storage | storage when alarm recording |
| Local Storage | TF Card Max 128G | |
| Power | Power | Solar energy and 18650 battery |
| Solar Energy consumption | 7.8W | |
| Battery Capacity | Max 6pcs 18650 battery (6*2500MA,Optional) | |
| Operating power consumption | Max 4W | |
| Standby consumption | 0.003W | |
| Others | Working Environment | Indoor/outdoor |
| Operation Temperature | -30°~+60° | |
| Humidity | 0%~90%RH | |
| Package | Product weight | 1.6KG |
| Product size | 244*170*101mm | |
| Packing weight | 1.84KG(Not Include battery) | |
| 2.15KG(Include battery) | ||
| Packing size | 287*201*172 mm | |
| Carton weight | 12KG/6PCS(Not Include battery) | |
| 14KG/6PCS(Include battery) | ||
| Carton size | 615*300*360mm | |
| Package List | Solar Panel*1,WIFI Camera*1,Screw Kit*1,USB Charging Cable*1,User Manual*1, Position Paper*1,18650 battery*6(Optional) | |
1. The red light flashes after power on, but the blue light does not flash
A. Please press and hold the reset button for about 3 seconds, you will hear a beep and the following voice prompt "System Reset", the camera will reset, and the blue light will flash.
B. If the customer presses the reset button for 8 seconds, the camera will enter the AP mode, and the Ubox-*** hotspot will be issued. At this time, the camera will flash red. Note that in the AP mode, the camera network cannot be configured, the customer only needs to press 3 again The second reset button can be reset.
2. How to watch the camera directly in AP mode
Press the reset button for 8 seconds, the camera will enter the AP mode, connect the mobile phone to the camera AP hotspot, the AP hotspot password is 12345678, then log out of the APP account and log in to the APP again to directly enter the monitoring screen.